Free to browse. Log in to unlock the full Rate Analysis of every Civil and Electrical item in the latest CPWD DSR.

Log in to QuickBOQ →
Chapter 13 · Finishing

Item 13.116 CS1

₹1360.45
Unit Sqm

Description

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below — 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. — 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. — 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. — 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Finalo coat to be done in 1 or 2 layers without gap of time.)

Cost at common quantities

QuantityAmount
1 Sqm₹1,360.45
10 Sqm₹13,604.50
100 Sqm₹1,36,045.00
1,000 Sqm₹13,60,450.00

Schedule rate × quantity, at ₹1,360.45 per Sqm. What you actually bill also depends on the premium quoted above or below DSR, and on taxes.

More items in Finishing

13.1.112 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) 13.1.212 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) 13.2.115 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) 13.2.215 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) 13.3.120 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) 13.3.220 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) 13.4.112 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 13.4.212 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 13.5.115 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) 13.5.215 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand) 13.6.120 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 13.6.220 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
Browse all Finishing items →

Want the material, labour and machinery build-up behind a rate like this? Browse published coefficient analyses for common items, or read how a DSR rate relates to its DAR analysis.