Free to browse. Log in to unlock the full Rate Analysis of every Civil and Electrical item in the latest CPWD DSR.

Aluminium Work — CPWD Civil DSR 2023

42 items in this chapter. Click any item for its full description, unit and rate.

21.1

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

21.1.1

For fixed portion

21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) kg ₹495.05 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg ₹530.90 21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) kg ₹539.85

21.1.2

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).

21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) kg ₹598.60 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg ₹634.45 21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) kg ₹643.45

21.2

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. sqm ₹1139.30 21.2.2 Pre-laminated particle board with decorative lamination on both sides. sqm ₹1115.40

21.3

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)

21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) sqm ₹1176.80 21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) sqm ₹1505.25 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) sqm ₹1685.40

21.4

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS

21.4.1 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. — With stainless steel cover plate minimum 1.25 mm thickness. each ₹2823.85 21.4.2 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. — With brass cover plate minimum 1.25 mm thickness. each ₹2966.10

21.5 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS — 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). kg ₹817.15 21.6 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. hanger ₹82.45

21.7

Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge.

21.7.1 Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) kg ₹680.55 21.7.2 Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) kg ₹716.40

21.8

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

21.8.1 Upto 5mm depth and 5 mm width meter ₹96.75

21.9

Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections.

21.9.1 For fixed portion kg ₹12.80 21.9.2 For shutters of doors, windows & ventilators. kg ₹12.80

21.10 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. sqm ₹4997.70

21.11

Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete.

21.11.1 205 x 19 mm nos ₹344.30 21.11.2 255 x 19 mm nos ₹387.00 21.11.3 355 x 19 mm nos ₹325.80 21.11.4 510 x 19 mm nos ₹802.40 21.11.5 710 x 19 mm nos ₹1478.15

21.12

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.

21.12.1 Anodized (AC 15 ) aluminium tubular handle bar nos ₹575.75 21.12.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar. nos ₹631.55 21.12.3 Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar nos ₹645.50

21.13 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. no ₹528.85 21.14 Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). kg ₹402.80

21.15

Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.

21.15.1 Anodized (AC 15) aluminium No. ₹89.40 21.15.2 Powder coated minimum thickness 50 micron aluminium. No. ₹97.95 21.15.3 Polyester powder coated minimum thickness 50 micron aluminium. No. ₹95.10

21.16

Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge

21.16.1 Anodized (AC 15 ) aluminium No. ₹107.90 21.16.2 Powder coated minimum thickness 50 micron aluminium No. ₹109.30 21.16.3 Polyester powder coated minimum thickness 50 micron aluminium. No. ₹112.15

21.17 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). kg ₹638.35 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). sqm ₹5325.90

21.19

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete complying to ASTM C920, DIN 18540-F & ISO 11600.

21.19.1 Upto 5mm depth and 5 mm width m ₹148.10 21.19.2 Upto 10 mm depth and 10 mm width m ₹200.95 21.19.3 Upto 20 mm depth and 20 mm width m ₹363.20

← All CPWD Civil DSR 2023 chapters

Want the rate build-up rather than just the rate? Browse material coefficient analyses, or read DSR vs DAR, explained.