120x120x12

square hollow section — 37.79 kg per metre, 48.14 cm² cross-sectional area. IS 4923:2017 (Amd. 2) Table 1 - Square Hollow Sections.

xyB 120D 120t 12
Mass per metre
37.79kg/m
Sectional area
48.14cm²
Depth
120mm
Width
120mm

Square Hollow Sections. Reproduced as printed in IS 4923:2017 (Amd. 2) Table 1 - Square Hollow Sections.

120x120x12 section properties

As printed in IS 4923:2017 (Amd. 2) Table 1 - Square Hollow Sections. 120 mm deep, 120 mm wide. Units are shown on every row, because the two standards on this site use different ones for the radius of gyration.

Dimensions

Depth of section D 120 mm
Width of section B 120 mm
Wall thickness t 12 mm

Mass and area

Mass per metre M 37.79 kg/m
Sectional area A 48.14 cm²

Major axis (z-z)

Second moment of area I 897.05 cm⁴
Radius of gyration r 4.32 cm
Elastic section modulus Ze 149.51 cm³
Plastic section modulus Zp 189.38 cm³

What a length of 120x120x12 weighs

Total weight is the mass per metre multiplied by the length and the number of pieces. Ten pieces of 120x120x12 at six metres each is 37.79 × 6 × 10 = 2,267 kg. There is nothing else to it — the standard publishes the mass, so no one needs to compute it from the area.

You can check that mass against the area on this page: 48.14 cm² of steel at 7 850 kg/m³ is 37.79 kg/m. Every row in this dataset was checked that way, which is how the contradictions flagged on some of these pages were found.

Work it out for your own lengths and quantities →

Common questions about 120x120x12

What is the weight of 120x120x12 per metre?

IS 4923 : 2017 gives 120x120x12 a mass of 37.79 kg per metre. Its printed cross-sectional area of 48.14 cm² agrees: 48.14 cm² of steel at 7 850 kg/m³ works out at 37.79 kg per metre.

How much does a 6 m length of 120x120x12 weigh?

226.74 kg. Mass per metre times length: 37.79 × 6. Ten such pieces come to 2267 kg.

What are the dimensions of 120x120x12?

120 mm deep and 120 mm wide, with a 12 mm web.

Free to browse. Log in to unlock the full Rate Analysis of every Civil and Electrical item in the latest CPWD DSR.

Log in to QuickBOQ →

Where these figures come from. IS 4923:2017 (Amd. 2) Table 1 - Square Hollow Sections Section properties are facts published in the standards, and they are reproduced here as printed. Where a standard contradicts itself, both of its figures are shown and neither is corrected.

What is ours. The selection and arrangement of these tables, the checks run against them, and the findings those checks produced — which rows disagree with themselves, which figures were superseded by amendment, and which could not be read — are QuickBOQ’s work, and so is this wording. Quote the numbers freely; they belong to everyone. Copying the compilation and the commentary is a different thing, and we would rather you linked to it.