220x220x6

square hollow section — 39.59 kg per metre, 50.43 cm² cross-sectional area. IS 4923:2017 (Amd. 2) Table 1 - Square Hollow Sections.

xyB 220D 220t 6
Mass per metre
39.59kg/m
Sectional area
50.43cm²
Depth
220mm
Width
220mm

Square Hollow Sections. Reproduced as printed in IS 4923:2017 (Amd. 2) Table 1 - Square Hollow Sections.

220x220x6 section properties

As printed in IS 4923:2017 (Amd. 2) Table 1 - Square Hollow Sections. 220 mm deep, 220 mm wide. Units are shown on every row, because the two standards on this site use different ones for the radius of gyration.

Dimensions

Depth of section D 220 mm
Width of section B 220 mm
Wall thickness t 6 mm

Mass and area

Mass per metre M 39.59 kg/m
Sectional area A 50.43 cm²

Major axis (z-z)

Second moment of area I 3,813 cm⁴
Radius of gyration r 8.7 cm
Elastic section modulus Ze 346.67 cm³
Plastic section modulus Zp 402.16 cm³

What a length of 220x220x6 weighs

Total weight is the mass per metre multiplied by the length and the number of pieces. Ten pieces of 220x220x6 at six metres each is 39.59 × 6 × 10 = 2,375 kg. There is nothing else to it — the standard publishes the mass, so no one needs to compute it from the area.

You can check that mass against the area on this page: 50.43 cm² of steel at 7 850 kg/m³ is 39.59 kg/m. Every row in this dataset was checked that way, which is how the contradictions flagged on some of these pages were found.

Work it out for your own lengths and quantities →

Common questions about 220x220x6

What is the weight of 220x220x6 per metre?

IS 4923 : 2017 gives 220x220x6 a mass of 39.59 kg per metre. Its printed cross-sectional area of 50.43 cm² agrees: 50.43 cm² of steel at 7 850 kg/m³ works out at 39.59 kg per metre.

How much does a 6 m length of 220x220x6 weigh?

237.54 kg. Mass per metre times length: 39.59 × 6. Ten such pieces come to 2375 kg.

What are the dimensions of 220x220x6?

220 mm deep and 220 mm wide, with a 6 mm web.

Free to browse. Log in to unlock the full Rate Analysis of every Civil and Electrical item in the latest CPWD DSR.

Log in to QuickBOQ →

Where these figures come from. IS 4923:2017 (Amd. 2) Table 1 - Square Hollow Sections Section properties are facts published in the standards, and they are reproduced here as printed. Where a standard contradicts itself, both of its figures are shown and neither is corrected.

What is ours. The selection and arrangement of these tables, the checks run against them, and the findings those checks produced — which rows disagree with themselves, which figures were superseded by amendment, and which could not be read — are QuickBOQ’s work, and so is this wording. Quote the numbers freely; they belong to everyone. Copying the compilation and the commentary is a different thing, and we would rather you linked to it.