Finishing — CPWD Civil DSR 2023

13.10 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. Sqm ₹506.60 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand). Sqm ₹518.55 13.12 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge. Sqm ₹537.45 13.13 12 mm cement plaster 1:2 (1 cement: 2 stone dust) Sqm ₹378.70 13.14 15 mm cement plaster 1:2 (1 cement: 2 stone dust) on the rough side of single or half brick wall. Sqm ₹437.20 13.15 20 mm cement plaster 1:2 (1 cement: 2 stone dust) Sqm ₹520.55 13.17 6 mm cement plaster 1:3 (1 cement: 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Sqm ₹396.65 13.18 Neat cement punning Sqm ₹79.95 13.20 Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Sqm ₹829.95 13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. bags of cement used in the mix ₹22.10 13.22 Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. Sqm ₹87.10 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Sqm ₹262.70 13.27 Extra for lining out plaster to imitate stone or concrete blocks walling. Sqm ₹113.90 13.30 18 mm thick moulded cement mortar band in two coats under layer 12 mm thick with cement mortar 1:5 (1 cement: 5 coarse sand) top layer 6mm thick with cement mortar 1:4 (1 cement: 4 fine sand). units ₹21.45 13.34 Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement: 3 marble dust) Sqm ₹716.95 13.36 Extra for pointing on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or part there of. sqm ₹8.65 13.38 Satna lime wash on walls with one coat Sqm ₹15.75 13.58 Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. sqm ₹334.50 13.59 Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. sqm ₹66.90 13.70 Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. Sqm ₹96.10 13.71 Lettering with black Japan paint of approved brand and manufacture units ₹6.15 13.72 Washed stone grit plaster on exterior walls of height upto 10 metre above ground level, in two layers, under layer 12mm cement plaster 1:4 (1cement: 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand :2 stone chipping 10mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in- charge (Payment for providing grooves shall be made separately). sqm ₹1162.25 13.74 Extra for washed grit plaster on exterior walls of height more than 10m from ground level for every additional height of 3 m or part thereof. Sqm ₹165.85 13.75 Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). Sqm ₹133.55 13.76 Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. m ₹100.60 13.77 Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. Sqm ₹76.05 13.78 Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ per liter respectively conforming to IS: 2547 (Part- 1 & II) 1976, applied on hacked / uneven background such as bare brick/block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. Sqm ₹468.90 13.79 Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. bag ₹78.35 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sqm ₹156.05 13.86 6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge. Sqm ₹269.15 13.88 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete sqm ₹19.75 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. sqm ₹25.15 13.105 Re-lettering with black Japan paint of approved brand and manufacture. units ₹3.85 13.106 Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. Sqm ₹95.80 13.114 CS1 Melamine polishing on wood work (one or more coat). Sqm ₹138.10 13.115 Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. Sqm ₹99.70 13.116 CS1 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below — 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. — 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. — 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. — 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Finalo coat to be done in 1 or 2 layers without gap of time.) Sqm ₹1360.45