Sloping Flange Channels (MC) — weight chart

All 20 sections from IS 808 Table 6 - Sloping Flange Channels. Click a designation for the full property table and the cross-section drawn to its own dimensions.

Sloping Flange Channels (MC): mass and section properties
Designation	Weightkg/m	Areacm²	Depthmm	Widthmm	Webmm	Flangemm	Izzcm⁴	Zzzcm³
MC 75	7.14	9.08	75	40	4.8	7.5	78.2	20.9
MC 100	9.56	12.1	100	50	5	7.7	191	38.4
MC 125	13.1	16.6	125	65	5.3	8.2	424	67.9
MC 125*	13.7	17.4	125	66	6	8.1	433	69.4
MC 150	16.8	21.3	150	75	5.7	9	786	104
MC 150*	17.7	22.5	150	76	6.5	9	810	108
MC 175	19.6	24.8	175	75	6	10.2	1,230	141
MC 175*	22.7	27.3	175	76	7.5	10.2	1,290	147
MC 200	22.3	28.4	200	75	6.2	11.4	1,820	182
MC 200*	24.3	30.9	200	76	7.5	11.4	1,900	190
MC 225	26.1	33.2	225	80	6.5	12.4	2,700	240
MC 225*	30.7	38.7	225	82	9	12.4	2,920	260
MC 250	30.6	38.9	250	80	7.2	14.1	3,820	306
MC 250*	34.2	43.4	250	82	9	14.1	4,060	325
MC 250*	38.1	48.1	250	83	11	14.1	4,280	342
MC 300	36.3	46.2	300	90	7.8	13.6	6,400	427
MC 300*	41.5	52.7	300	92	10	13.6	6,880	458
MC 300*	46.2	58.4	300	93	12	13.6	7,260	484
MC 350	42.7	54.3	350	100	8.3	13.5	10,000	575
MC 400	50.1	63.7	400	100	8.8	15.3	15,100	758

Free to browse. Log in to unlock the full Rate Analysis of every Civil and Electrical item in the latest CPWD DSR.

Other tables

Medium & Wide Flange Beams (MB, WB) IS 808 Table 1 · 28 sections Light & Junior Beams (LB, JB) IS 808 Table 2 · 25 sections Narrow Parallel Flange Beams (NPB) IS 808 Table 3 · 70 sections Wide Parallel Flange Beams (WPB) IS 808 Table 4 · 123 sections Column / Heavy Beams (SC, HB) IS 808 Table 5 · 26 sections Sloping Flange Channels (LC, JC) IS 808 Table 7 · 20 sections Parallel Flange Channels (MCP) IS 808 Table 8 · 20 sections Equal Leg Angles IS 808 Table 9 · 72 sections Unequal Leg Angles IS 808 Table 10 · 19 sections Angles (supplementary) IS 808 Table 11 · 62 sections Unequal Leg Angles (supplementary) IS 808 Table 12 · 45 sections Parallel Flange Bearing Piles (PBP) IS 808 Table 13 · 29 sections Square Hollow Sections IS 4923:2017 (Amd. 2) Table 1 · 212 sections Rectangular Hollow Sections IS 4923:2017 Table 2 · 216 sections Circular Hollow Sections IS 1161:2014 Table 1 · 80 sections

Search all 1,067 sections and price a quantity →

Common questions about Sloping Flange Channels (MC)

How many sloping flange channels (mc) are there in IS 808 : 2021?

20, from MC 75 at 7.14 kg per metre to MC 400 at 50.1 kg per metre. They are printed in IS 808 Table 6 - Sloping Flange Channels.

Which is the lightest sloping flange channels (mc) in this table?

MC 75, at 7.14 kg per metre with a sectional area of 9.08 cm². The heaviest is MC 400 at 50.1 kg per metre.

How do I work out the weight of a length from this chart?

Multiply the mass per metre by the length and the number of pieces. MC 75 at 7.14 kg/m, in 6 m lengths, ten of them, is 7.14 × 6 × 10 = 428 kg. The standard publishes the mass, so there is nothing to compute from the area.

Why are 2 rows in this table marked?

Because the standard contradicts itself on those rows: it prints both the sectional area and the mass per metre, so each is a check on the other, and on those rows the two disagree by more than rounding explains. Both figures are shown exactly as printed and neither is corrected — but you are told, so it can be checked before it reaches a tender.

Where these figures come from. IS 808 Table 6 - Sloping Flange Channels Section properties are facts published in the standards, and they are reproduced here as printed. Where a standard contradicts itself, both of its figures are shown and neither is corrected.

What is ours. The selection and arrangement of these tables, the checks run against them, and the findings those checks produced — which rows disagree with themselves, which figures were superseded by amendment, and which could not be read — are QuickBOQ’s work, and so is this wording. Quote the numbers freely; they belong to everyone. Copying the compilation and the commentary is a different thing, and we would rather you linked to it.